Insects perform feats of strength and endurance that belie their small stature. Insect-scale robots—although subject to the same scaling laws—demonstrate reduced performance because existing microactuator technologies are driven by low–energy density power sources and produce small forces and/or displacements. The use of high–energy density chemical fuels to power small, soft actuators represents a possible solution. We demonstrate a 325-milligram soft combustion microactuator that can achieve displacements of 140%, operate at frequencies >100 hertz, and generate forces >9.5 newtons. With these actuators, we powered an insect-scale quadrupedal robot, which demonstrated a variety of gait patterns, directional control, and a payload capacity 22 times its body weight. These features enabled locomotion through uneven terrain and over obstacles.
Note: When clicking on a Digital Object Identifier (DOI) number, you will be taken to an external site maintained by the publisher.
Some full text articles may not yet be available without a charge during the embargo (administrative interval).
What is a DOI Number?
Some links on this page may take you to non-federal websites. Their policies may differ from this site.
-
Free, publicly-accessible full text available September 15, 2024
-
Herein, complex motion in soft, fluid‐driven actuators composed of elastomer bladders arranged around a neutral plane and connected by slender tubes is demonstrated. Rather than relying on complex feedback control or multiple inputs, the motion is generated with a single pressure input, leveraging viscous flows within the actuator to produce nonuniform pressure between bladders. Using an accurate predictive model coupling with a large deformation Cosserat rod model and low‐Reynolds‐number flow, all dominating dynamic interactions including extension and curvature are captured with two governing equations. Given insights from this model, five design elements are described and demonstrated in practice. By choosing the relative timescales between the solid, fluid, and input pressure cycles, the tip of the actuator can obtain almost any desired trajectory and can be placed anywhere temporarily within its 2D workspace. Finally, the benefits of viscous‐driven soft actuators are showcased in a six‐legged untethered robot able to walk 0.05 body lengths per second. The foundation is laid for a new class of morphologically intelligent, soft robotic actuators that enables complex deformations and multifunctionality without explicit drivers; whereby generating nonuniform pressure distributions, their infinite degrees of freedom can be exploited.
-
Existing tactile stimulation technologies powered by small actuators offer low-resolution stimuli compared to the enormous mechanoreceptor density of human skin. Arrays of soft pneumatic actuators initially show promise as small-resolution (1- to 3-mm diameter), highly conformable tactile display strategies yet ultimately fail because of their need for valves bulkier than the actuators themselves. In this paper, we demonstrate an array of individually addressable, soft fluidic actuators that operate without electromechanical valves. We achieve this by using microscale combustion and localized thermal flame quenching. Precisely, liquid metal electrodes produce sparks to ignite fuel lean methane–oxygen mixtures in a 5-mm diameter, 2-mm tall silicone cylinder. The exothermic reaction quickly pressurizes the cylinder, displacing a silicone membrane up to 6 mm in under 1 ms. This device has an estimated free-inflation instantaneous stroke power of 3 W. The maximum reported operational frequency of these cylinders is 1.2 kHz with average displacements of ∼100 µm. We demonstrate that, at these small scales, the wall-quenching flame behavior also allows operation of a 3 × 3 array of 3-mm diameter cylinders with 4-mm pitch. Though we primarily present our device as a tactile display technology, it is a platform microactuator technology with application beyond this one.